PYLE PLCM10 License Plate Mount Rear View camera with Night Vision
- Output Standard: PAL/NTSC – Video Output: RCA 1.0 VppComposite Video @ 75 Ohm
- High Resolution: 380TV Lines x 60 Fields – Power Supply: DC 12 V > 75 Ohm
- Image Sensor: Ov 7910 Color CMOS – Temperature: -10-50˚ Celcius
- Lens: 6mm 92˚ – Unit Dimensions: 1.3”(H) x 8”(W) x 1.26”(D)
- Low Light Illumination: 1.5 Lux/F1.2
Product Description
This rear view camera mounts easily above your license plate and outputs crystal clear video over an RCA jack. Connect to a monitor in your car, and you’ll be able to see everything behind you on the screen! Perfect for backing into tight spots or moving in reverse when visibility is limited – the PLCM10 is like an extra eye. And this model comes with nightvision LEDs, which illuminate the area behind you at night. This small and durable unit will keep you safe … More >>
Source PYLE PLCM10 License Plate Mount Rear View camera with Night Vision
Categories: Car Electronics & GPS
Watch Video Here: http://www.amazon.com/review/R7MG0D4Q84XWU This camera functions, meaning it transmits an image from the lens to your monitor, however, the image quality is disgusting, it’s some sort of weird black and white negative image. I would not recommend this product.
But if you do decide to buy: it comes with a single RCA/composite yellow wire about 12ft long. Also comes with a power wire which is about 3feet long. The RCA and power wires plug into female connectors making it easy to connect and disconnect. There is no easy way to disconnect the connectors (if that makes sense) so if you have to drill a hole to enter your trunk it will be a lot larger than the wire actually needs to be.
Also this thing is pretty big and noticeable making it not very attractive. I installed a similar wireless backup cam in my pops truck and that camera was about half the size of this thing.
I will be personally saving my money and purchasing a better camera in the future, but since this is installed I plan on using it for now.
Rating: 1 / 5
Installed on 2011 f250 with a pioneer avic-f700bt reciever. Camera works great, perfect picture and easy to install.
Rating: 5 / 5
This is a great camera for $30. No it does not have the clarity of a $400-500 dollar camera, but what do you expect. It mounted quickly and easily on the license plate, and provides more than adequate picture for the little time you use it. My only complaint was the the video cord was too short to reach my cab, so I simply added another length of cable. Works great, especially for hooking up to a trailer. Cudo’s to Pyle for providing a simple, low cost camera option!!!
Rating: 4 / 5
This camera has decent picture quality. After two weeks use this item is worthless, and the lens and ir leds are covered with condensation. The case that it is in is NOT AT ALL watertight.
Rating: 2 / 5
DO NOT BUY THIS!!!! its junk. blurry black and white “negative” looking picture, very dark, it’s junk no if ands or buts about it. i tried to install it and thought i did it wrong so i took it to a shop and they laughed when i showed it to them, they told me it was junk before hooking it up and i asked them to hook it up anyways, they did and with the same result. I’m out the $30+ i paid for it and also the $50 for the install.
Rating: 1 / 5